This article is more than one year old. Older articles may contain outdated content. Check that the information in the page has not become incorrect since its publication.

Kubernetes 1.27: updates on speeding up Pod startup

How can Pod start-up be accelerated on nodes in large clusters? This is a common issue that cluster administrators may face.

This blog post focuses on methods to speed up pod start-up from the kubelet side. It does not involve the creation time of pods by controller-manager through kube-apiserver, nor does it include scheduling time for pods or webhooks executed on it.

We have mentioned some important factors here to consider from the kubelet's perspective, but this is not an exhaustive list. As Kubernetes v1.27 is released, this blog highlights significant changes in v1.27 that aid in speeding up pod start-up.

Parallel container image pulls

Pulling images always takes some time and what's worse is that image pulls are done serially by default. In other words, kubelet will send only one image pull request to the image service at a time. Other image pull requests have to wait until the one being processed is complete.

To enable parallel image pulls, set the serializeImagePulls field to false in the kubelet configuration. When serializeImagePulls is disabled, requests for image pulls are immediately sent to the image service and multiple images can be pulled concurrently.

Maximum parallel image pulls will help secure your node from overloading on image pulling

We introduced a new feature in kubelet that sets a limit on the number of parallel image pulls at the node level. This limit restricts the maximum number of images that can be pulled simultaneously. If there is an image pull request beyond this limit, it will be blocked until one of the ongoing image pulls finishes. Before enabling this feature, please ensure that your container runtime's image service can handle parallel image pulls effectively.

To limit the number of simultaneous image pulls, you can configure the maxParallelImagePulls field in kubelet. By setting maxParallelImagePulls to a value of n, only n images will be pulled concurrently. Any additional image pulls beyond this limit will wait until at least one ongoing pull is complete.

You can find more details in the associated KEP: Kubelet limit of Parallel Image Pulls (KEP-3673).

Raised default API query-per-second limits for kubelet

To improve pod startup in scenarios with multiple pods on a node, particularly sudden scaling situations, it is necessary for Kubelet to synchronize the pod status and prepare configmaps, secrets, or volumes. This requires a large bandwidth to access kube-apiserver.

In versions prior to v1.27, the default kubeAPIQPS was 5 and kubeAPIBurst was 10. However, the kubelet in v1.27 has increased these defaults to 50 and 100 respectively for better performance during pod startup. It's worth noting that this isn't the only reason why we've bumped up the API QPS limits for Kubelet.

  1. It has a potential to be hugely throttled now (default QPS = 5)
  2. In large clusters they can generate significant load anyway as there are a lot of them
  3. They have a dedicated PriorityLevel and FlowSchema that we can easily control

Previously, we often encountered volume mount timeout on kubelet in node with more than 50 pods during pod start up. We suggest that cluster operators bump kubeAPIQPS to 20 and kubeAPIBurst to 40, especially if using bare metal nodes.

More detials can be found in the KEP https://kep.k8s.io/1040 and the pull request #116121.

Event triggered updates to container status

Evented PLEG (PLEG is short for "Pod Lifecycle Event Generator") is set to be in beta for v1.27, Kubernetes offers two ways for the kubelet to detect Pod lifecycle events, such as the last process in a container shutting down. In Kubernetes v1.27, the event based mechanism has graduated to beta but remains disabled by default. If you do explicitly switch to event-based lifecycle change detection, the kubelet is able to start Pods more quickly than with the default approach that relies on polling. The default mechanism, polling for lifecycle changes, adds a noticeable overhead; this affects the kubelet's ability to handle different tasks in parallel, and leads to poor performance and reliability issues. For these reasons, we recommend that you switch your nodes to use event-based pod lifecycle change detection.

Further details can be found in the KEP https://kep.k8s.io/3386 and Switching From Polling to CRI Event-based Updates to Container Status.

Raise your pod resource limit if needed

During start-up, some pods may consume a considerable amount of CPU or memory. If the CPU limit is low, this can significantly slow down the pod start-up process. To improve the memory management, Kubernetes v1.22 introduced a feature gate called MemoryQoS to kubelet. This feature enables kubelet to set memory QoS at container, pod, and QoS levels for better protection and guaranteed quality of memory when running with cgroups v2. Although it has benefits, it is possible that enabling this feature gate may affect the start-up speed of the pod if the pod startup consumes a large amount of memory.

Kubelet configuration now includes memoryThrottlingFactor. This factor is multiplied by the memory limit or node allocatable memory to set the cgroupv2 memory.high value for enforcing MemoryQoS. Decreasing this factor sets a lower high limit for container cgroups, increasing reclaim pressure. Increasing this factor will put less reclaim pressure. The default value is 0.8 initially and will change to 0.9 in Kubernetes v1.27. This parameter adjustment can reduce the potential impact of this feature on pod startup speed.

Further details can be found in the KEP https://kep.k8s.io/2570.

What's more?

In Kubernetes v1.26, a new histogram metric pod_start_sli_duration_seconds was added for Pod startup latency SLI/SLO details. Additionally, the kubelet log will now display more information about pod start-related timestamps, as shown below:

Dec 30 15:33:13.375379 e2e-022435249c-674b9-minion-group-gdj4 kubelet[8362]: I1230 15:33:13.375359 8362 pod_startup_latency_tracker.go:102] "Observed pod startup duration" pod="kube-system/konnectivity-agent-gnc9k" podStartSLOduration=-9.223372029479458e+09 pod.CreationTimestamp="2022-12-30 15:33:06 +0000 UTC" firstStartedPulling="2022-12-30 15:33:09.258791695 +0000 UTC m=+13.029631711" lastFinishedPulling="0001-01-01 00:00:00 +0000 UTC" observedRunningTime="2022-12-30 15:33:13.375009262 +0000 UTC m=+17.145849275" watchObservedRunningTime="2022-12-30 15:33:13.375317944 +0000 UTC m=+17.146157970"

The SELinux Relabeling with Mount Options feature moved to Beta in v1.27. This feature speeds up container startup by mounting volumes with the correct SELinux label instead of changing each file on the volumes recursively. Further details can be found in the KEP https://kep.k8s.io/1710.

To identify the cause of slow pod startup, analyzing metrics and logs can be helpful. Other factors that may impact pod startup include container runtime, disk speed, CPU and memory resources on the node.

SIG Node is responsible for ensuring fast Pod startup times, while addressing issues in large clusters falls under the purview of SIG Scalability as well.